[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Direct Air + Purchased Air.

Dear Group Members.

I'm simulating multizone building with
- one air primary loop,
- one zone splitter (in zone supply air path) and one zone mixer (in zone return air path).

In each zone there are a DIRECT AIR object and a PURCHASED AIR object.
The simulation run correctly, without any error, but it seem that cooling and heating energy needs aren't influenced by ventilation rate by air loop and path.

Is it correct evaluating energy need by using PURCHASED AIR object with DIRECT AIR object in the same time and zone?
Generally, is there something  wrong in this type of ventilation system concept?

Thank you very much.
Best regards.
Marco Pietrobon.




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/