Re: [EnergyPlus_Support] Converting DOE-2.2 Chiller curves to EnergyPlus

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

We do not support DOE-2 or eQUEST. Support for those tools
is provided through DOE2.com, which is not affiliated in any way with the
Department of Energy.

In other words, I have no idea if the convert routine will work for your
curve.  You originally mentioned DOE-2.1E, which is what the
coefficient routines were designed for.

At 09:12 AM 9/11/2009, Zhen Tian wrote:
> I have a new question when I saw
> a new chiller curve. It is the DOE2.2 chiller curve. I mentioned that
> DOE2 curve part load ratio (EIR_PLR) curve used to be a quadratic curve
> (DOE2.1E I guess). Then when try to convert the DOE2.2 water cooled
> electric chiller part load curve (EIR_PLR) to E+, I foud it is now
> defined as "BI-QUADRATIC-RATIO&DT" curve which seems to be
> new in DOE2.2.

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___