[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: CTF vs. CondFD results

Bereket,

Good point.  I did get better results with thin wooden walls, however, I'd like to think that results are close for more typical walls.  

I think I ruled out all input errors by using identical model parameters except for the heat balance algorithm.

Thanks.


Liam

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Bereket Nigusse <nigusse_ba@...> wrote:
>
>  
> Liam,
>  
> To diagnose the possible causes of the difference it is always helpful to see the material types and the corresponding thickness of the heavy mass construction. For light constructions both method should show good match provided all other inputs are correct and identical. I suggest you may want to compare the two procedures by changing the layers thckness (use light construction) to rule out other input errors.
> 
> Bereket
> 
> --- On Fri, 11/6/09, Liam <liambrn@...> wrote:
> 
> 
> From: Liam <liambrn@...>
> Subject: [EnergyPlus_Support] CTF vs. CondFD results
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Date: Friday, November 6, 2009, 2:22 PM
> 
> 
>   
> 
> 
> 
> Hi All,
> 
> I'm modeling a building of fairly heavy mass so I want to use the CondFD algorithm to better characterize transient effects. A comparison between CTF and CondFD yields differences in predicted heating loads of 100% or more. 
> 
> I repeated the comparison for several of the example files, e.g., 4ZoneWithShading_ Simple_1 and got similar differences.
> 
> Everything in the models is identical except for HeatBalanceAlgorith m. I used 20 time-steps/hour for both algorithms.
> 
> Any thoughts as to what might be happening?
> 
> Thanks in advance!
> 
> Liam O'Brien
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/