[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] electricity of HVAC in joules as an output

The two columns show the amount of "energy" required to meet the 
thermostat set point temperature. This IS NOT the same as the 
"electricity" required to condition the building. You will have to add 
an HVAC system (which would substitute for the Ideal Loads Air System 
that you are using). There must be a way to select an HVAC system in 
Design Builder. I am not familiar with that software, ask this question 
on the Design Builder support page.

rasha mahmoud wrote:
>
> Dear Dr.,
> Thank you so much. I the two lines you sent me and the csv output 
> appeared is another two columns with DistrictCooling:Facility 
> [J](RunPeriod) and District heating:Facility [J](RunPeriod) WITHOUT 
> MENTIONING ELECTRICITY IN THE COLUMN AS IT DOES IN THE ELECTRICITY 
> LIGHTING COLUMN (J) so is that the electricity of HVAC I was looking for?
> If so can I change the period can I have electricity HVAC monthly or 
> daily?
> Thank you very very very much
>
>
> 

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/