[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] question about using slab utility





Build your own IDF file similar to the Slab Example file.  The example file IDFs are for EnergyPlus, not the slab program -- it takes a special form of IDF.  Same is true for the Basement utility.

Read about ground heat transfer with EnergyPlus in the Auxiliary Programs document.

At 05:11 PM 12/2/2009, saif_1509 wrote:
I am trying to get ground temperature through EP-launch's Slab utility. Whenever I browse an IDF file in the Input File(IDF)section, the program does not simulate. It only works when I browse the SlabExample. I tried using an example idf file also. same thing happens. What is the way to get ground temperature?


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___