[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Speeding up E+ simulation time with ruby script.



As far as I know, the warmup day is exactly like the first day of simulation, the components should run as they would on the first day.  I do know that some warning messages within the simulation are muted during warmup while things get converged, but the airflow network should still operate.

Edwin

On Tue, Dec 8, 2009 at 04:27, chris_malc_yates <chris_malc_yates@xxxxxxxxxxx> wrote:
 

So, if the loads converge (as per warm-up) the ends of the various eso/ csv/ bins should line up quite nicely. Do you know if the warmup incorporates the Airflow network model?



--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> Warmup simulates the first day of the environment until loads convergence
> is reached (or as you mentioned the building thermal mass has settled).
>
> These results are not recorded in the final results though you can get them
> placed into the .eso file. (I don't remember if the csv will then show
> them or not).
>
> So, each split version will use the first day it thinks it is going to
> simulate as the warmup day.
>




__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___