[EnergyPlus_Support] HVAC Diagram hang up

[Jason Kirkpatrick <jason.alan.kirkpatrick@xxxxxxxxx>]

All,

I am having a problem with the HVAC Diagram post-process. The
simulation will run fine until it gets to the HVAC-Diagram post
process, at which point, the simulation stalls and just never
finishes. It does not give an error or crash, it just doesn't ever
finish. Is there any way to turn off the HVAC Diagram post process? I
don't really need the diagram, I just want to get the output results
and errors, which are not being written due to the diagram hang up.

Thanks,

Jason Kirkpatrick


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/