The way WUFI calculates is to divide each material in a wall
assembly into a number of sub layers (cells) and at each time step it
calculates a heat and moisture balance of all the cells in the wall assembly.
Apparently, EnergyPlus allows you to output the individual cell data which
would allow you to look at a temperature/moisture profile of the wall. You need
RH and moisture content because 100% RH does not always mean the material is
fully saturated. You may need to check the reference to find it, but there
should be surface heat and moisture fluxes as well.
Ned
Lyon, P.E. (MA)
Staff Consultant
SIMPSON
GUMPERTZ & HEGER
781.907.9000 main
781.907.9350 direct
781.907.9009 fax
www.sgh.com
From:
EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On
Behalf Of ozgur gocer
Sent: Saturday, January 30, 2010 4:50 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] input for HAMT modeling outputs
|
Hi, i looked at the example file for HAMT modeling. what is
the meaning of outputs; "HAMT-Profile Construction 1 cell 1 Temp" "HAMT-Profile Construction 1 cell 1 water" "HAMT-Profile Construction 1 cell 1 RH" the another question; Is it possible to get the heat flux
output data of a surface with my best regards ozgur |
Yahoo!
Türkiye açıldı!
Haber, Ekonomi, Videolar, Oyunlar hepsi Yahoo! Türkiye'de!
www.yahoo.com.tr
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___