I’ve only few experience on HAMT but
as far as I understood E+ divide the material in cells according it’s
criteria with “thinner” cells near to the border consequently cells
are never equal.
On simulation is necessary explicitly ask
for the results on each cell on “output:variable”, obviously the
number must be coherent with the number of cells produced automatically by E+. I’ve
never found problems in this way
Josep Solé
URSA Insulation S.A-
URALITA
European Sustainibility & Technical Manager
Móvil +34 606 42 32 14
P URALITA / URSA se compromete
con el ahorro de energía. Antes de imprimir este mensaje asegúrese de que es
necesario.
Aviso de confidencialidad
Este
mensaje contiene información que puede ser confidencial y de uso restringido.
Si usted no es el receptor deseado del mensaje (ni está autorizado a recibirlo
por éste) no está autorizado a copiar, reenviar, o por otra parte, divulgar el
mensaje o su contenido a cualquier otro. Si ha recibido este mensaje por error,
por favor, notifíquenoslo inmediatamente y bórrelo de su sistema.
De: EnergyPlus_Support@xxxxxxxxxxxxxxx
[mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] En
nombre de ozgur gocer
Enviado el: jueves, 04 de febrero
de 2010 12:10
Para:
EnergyPlus_Support@xxxxxxxxxxxxxxx
Asunto: [EnergyPlus_Support] cells
in HAMT modeling
|
Dear all, in the engineering reference it is written that
"each material split up further into cells
through its depth" 1- i want to ask if the cells divide the material into
equal parts or the cells become intense and smaller in size
near the corners 2- in the end of simulation i checked the eio file
and it was reported that 38 cells were placed. but in csv file only 28 cells
RH and temperature values were reported. thanks ozgur gocer |
Yahoo! Türkiye açıldı!
Haber, Ekonomi, Videolar, Oyunlar hepsi Yahoo! Türkiye'de!
www.yahoo.com.
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___