[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] output variable "diff sol amount from Ext windows to internal surface"

If I open the example file WindowTests.idf and run it in V4, I do see 
the report variable. It looks like you do not need to use the 
DispalyAdvancedReportVariables to see this report variable. Would you 
try this?

Zone,Average,Initial Transmitted Diffuse Solar Absorbed on Inside of 
Surface [W]


Linda Lawrie wrote:
>
> you might send your file and your question to the helpdesk -- 
> energyplus-support@xxxxxxxx
>
> At 07:57 AM 3/30/2010, Diego Baldo wrote:
>
>
>> yes, I only have external windows...
>>
>> Baldo Diego
>>
>>
> *Da:* Linda Lawrie <linda@xxxxxxxxxxxxxx>
> *A:* EnergyPlus_Support@xxxxxxxxxxxxxxx
> *Inviato:* Mar 30 marzo 2010, 15:50:31
> *Oggetto:* Re: [EnergyPlus_Support] output variable "diff sol amount 
> from Ext windows to internal surface"
>
>
>
> Do you have any external windows in your project?
>
> At 07:32 AM 3/30/2010, Diego Baldo wrote:
>
>
>> Yes, before I ran the simulation and then I looked to see if this was 
>> the variable output ...
>>
> *Da:* Richard Raustad <RRaustad@FSEC. UCF.EDU>
> *A:* EnergyPlus_Support@ yahoogroups. com
>
>
>
> 

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/