[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] RE: EnergyPlus Humidifiers
A quick review of the code shows that heat gain from the steam is
accounted for. What are you seeing that makes you think otherwise?
Richard Raustad wrote:
> There is an item for steam humidifiers on the wish list, not sure when
> it will get funded.
>
> Peter Henniger wrote:
>>
>> Linda
>>
>> Was wondering if it is in the works to update the Humidifier module
>> to include other types, i.e. steam and evaporative types.
>>
>> It is a bit awkward having only electric, and the model doesn’t
>> account for heat gain from steam, or heat loss from evaporative.
>>
>> Regards
>>
>> Peter
>>
>> *From:* EnergyPlus_Support@xxxxxxxxxxxxxxx
>> [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] *On Behalf Of *Linda Lawrie
>> *Sent:* March 26, 2010 3:12 PM
>> *Subject:* [EnergyPlus_Support] Version 5 features (final draft)
>>
>> Version 5.0, Release April 2010
>>
>> Data Sets
>> * New refrigerated case data set.
>>
>> Input
>> * Slab and Basement preprocessors integrated to run automatically
>> prior to EnergyPlus simulation
>> * New "Unit Type" field for schedules to support units conversions of
>> schedule values
>> * Added ExternalInterface to connect to the Building Controls Virtual
>> Test Bed using Ptolemy.
>>
>> Geometry/Window/Wall/Shading
>> * 2-node ConductionFiniteDifferenceSimplified model added.
>>
>> Daylighting
>> * Allow switchable windows like electrochromic windows to
>> continuously dim, instead of only switching to fully dark state.
>> Allows the zone to meet the maximum glare index while providing
>> daylight for spaces.
>>
>> Zone Model
>> * Analytical and Euler solution options for zone air heat balance added.
>>
>> Natural and Mechanical Ventilation
>> * Added minimum outdoor air flow rate operation controls to single
>> and dual duct VAV air terminals.
>> * Added maximum supply air flow rate during reheat to single duct VAV
>> air terminal.
>> * New object ZoneHVAC:OutdoorAir to describe outdoor air flow rate
>> for use by other objects.
>> * New ZoneVentilation:WindandStackOpenArea object calculates
>> ventilation rates based on winds and stack effects.
>> * Zone HVAC outdoor air unit module for make-up air and DOAS.
>>
>> HVAC and Refrigeration
>> * Refrigeration loops can now model CO2 secondary loops.
>> * Lighting in refrigerated cases revised to better match
>> manufacturer's practices.
>> * Zone-side impacts of refrigerant piping heat exchange added.
>> * Default 'on' schedules for refrigerated cases and walk-ins added
>> * Dual layer controls for radiant systems removed
>> * Basin heater added to all chillers except absorption chillers.
>> * Basin heater added to one and two speed cooling towers.
>> * Pumps can ride curves based on pressure.
>> * New steam baseboard with radiant heat.
>> * New electric radiant/convective baseboard.
>> * Added HVACTemplate:Zone:WaterToAirHeatPump and
>> HVACTemplate:Plant:MixedWaterLoop
>> * Standard rating (net) cooling capacity and SEER value reported for
>> single speed DX cooling coil with air-cooled condenser.
>>
>> Electrical Systems
>> * Improved methodology for electric load dispatch via the electric
>> load center.
>>
>> Controls and User Functions
>> * Enhancements to EMS including: system timestep built-in variable,
>> detect unbalanced parentheses in Erl, custom schedule output, and
>> coupling with ExternalInterface.
>>
>> On-Site Energy Supply
>> * Wind turbine module (horizontal and vertical axis turbines).
>>
>> Output
>> * New predefined output table for DX cooling coils as part of
>> EquipmentSummary report summarize the calculated capacity and SEER
>> values.
>> * New simulations database table and tabular reports data added to
>> SQL database output.
>> * Added report variables for beam and diffuse solar radiation for
>> blinds.
>> * Users can turn off most surface variables to a minimal critical set
>> with single command. Allows tremendous reduction in execution time
>> for large projects with many surfaces.
>>
>> Utilities
>> * New utility EP-Compare allows users to graphically compare results
>> from two simulations.
>> * IDF Editor supports IP units in schedules and other objects.
>> * EP-Launch, IDF Editor, and WeatherConverter updates throughout.
>>
>> Documentation and Guides
>> * Two new guides: Tips and Tricks Using EnergyPlus, and External
>> Interface Application Guide.
>> * Input/Output Reference and Engineering Reference updated and
>> extended for all new features and updates. Total documentation now
>> exceeds 4,700 pages.
>> * New translation capability added to EnergyPlus web site allows
>> translation into 50 languages.
>>
>> Validation and Testing
>> * New testing report: EnergyPlus Testing with IEA BESTEST Mechanical
>> Equipment & Control Strategies for a Chilled Water and a Hot Water
>> System
>>
>> Platforms
>> * Windows (XP, Vista, 7), Linux, Mac (tested for Snow Leopard)
>>
>>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/