[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Auto-Sizing for WLHP
Hi,
I'm going through the example files provided, and noticed that at least for "5ZoneWaterLoopHeatPump.idf" equipment sizes are specified in the file. I tried making an equivalent file from scratch, with only two-zones and allowing auto-sizing. The simulation crashes, giving me the error below, among others. If I set the equipment sizing to match the example file, the program runs, although with some significant warnings (my two zones are much smaller than the example file's zones).
What are the guidelines for auto-sizing of equipment?
** Severe ** GetInterpolatedSatProp: Saturation temperature for interpolation is out of range of data supplied: **
** ~~~ ** Called from:CalcWatertoAirHPHeating:LoadSideTemp During Warmup, Environment=CHICAGO_IL_USA ANNUAL HEATING 99% DESIGN CONDITIONS DB, at Simulation time=01/21 00:00 - 00:15
** ~~~ ** Refrigerant temperature = -316.27
** ~~~ ** Returned saturated property value = 29600.000
Thanks,
--
Karen
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___