[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Specifying weather file at simulation start





It only overrides what is in the Site:Location data.

At 10:45 AM 5/11/2010, roberturban4848 wrote:
What exactly does specifying the weather file override within the IDF file? For example, in my IDF file, I have information for Site:Location, SizingPeriod:DesignDay, Site:GroundTemperature:BuildingSurface specifically for Columbus, Ohio. If I run an EnergyPlus simulation with that exact IDF file, but I specify a weather file for say, Phoenix, Arizona, will it override the information I have specific to Columbus? If so, what exactly does it override?


__._,_.___


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___