[EnergyPlus_Support] Re: Supply and Return temperature

[Mário <mneves32@xxxxxxxxx>]

Hello Ven

You can setpoint a node tempreture and use a schedule to change the output tempreture of the system depending on the colling capacity and fluid flow..
In the case of the return tmpretura in the plant sizing object you define the loop tempreture diferance, and if the flow and demand side parameters are correctly sized you can achive your objective. 
To start out try to autosize sime parametre.

MN

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "eplusven" <eplusven@...> wrote:
>
> Hi All,
> 
> Could you please suggest me on the following, 
> 
> 1. How to change the supply and return temperature of a chilled water of a chiller system. 
> 
> I would like to try with different supply and return temperatures. I found one place Sizing:Plant. I am not sure if this is the correct place to simulate this scenario.
> 
> Thanks
> -Ven
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/