[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Separating fan energy during heating and cooling



Look at the custom meters. Use them to aggregate the equipment energy 
using the specific equipment report variables.

Meter:Custom,
MyCoolingEnergy, !- Name
Electricity, !- Fuel Type
, !- Key Name 1
DX Cooling Coil Electric Consumption; !- Report Variable or Meter Name 1

Meter:Custom,
MyFanEnergy, !- Name
Electricity, !- Fuel Type
, !- Key Name 1
Fan Electric Consumption; !- Report Variable or Meter Name 1

vrushali mendon wrote:
>
> Hello,
>
> I need to separate the fan energy during the heating and cooling mode 
> to get the true heating and cooling energy consumption. Is there a way 
> to set it up during the simulation itself rather than post processing 
> in a spreadsheet as mentioned elsewhere on the forum?
>
> Thank you,
> Vrushali
>
> 

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/