| Hi all, This is Anubhav Saxena graduate student from the purdue university,i am doing some projects on energy plus here and I had tried my best but unable to find that how we can following data from the energy plus.Also i had given some list of errors which the given example file of energy plus is giving while doing simulations on them a)Is there any module or method in energy plus by which we can get the proper ADP for the coil (cooling coil design setpoint) b)ERSHF (Effective room sensible heat factor) value c)Bypass factor for the coil and whether they considered bypass factor values in their calculations? d)Amount of airflow which was shown by the energy plus is always low if compared the results with manual calculations for the air flow List of Errors:--- 1)Warning **
ControlCompOutput: Maximum iterations exceeded for ZoneHVAC:FourPipeFanCoil = SPACE4-1 FAN COIL ** ~~~ ** ... Load met = -111.49468 W. ** ~~~ ** ... Load requested = -113.65607 W. ** ~~~ ** ... Error = 1.90169270 %. ** ~~~ ** ... Tolerance = 0.10000000 %. ** ~~~ ** ... Error = (Load met - Load requested) / MAXIMUM(Load requested, 100) 2)PTAC Example file system is showing 140 warnings for the selected location of chicago as here many times of year DBT of outside air is very low. 3)Temperature of one of the external wall is out of range Regards Anubhav saxena |