Simulation runs and prints map with 7x7 grid points, but not with 10 x 10 grid points. E+v5
The following error may give a clue:
** Warning ** CalcDaylightCoeffMapPoints: For Zone="91720" External Window="W_91619_14_0_0_0_0_0_WIN"in Zone="91619" map point is less than 0.15m (6") from window plane
** ~~~ ** Distance=[5.8E-002 m] map point=[-86.8,26.0,2.4], Inaccuracy in Map Calcs may result.
Any idea why this is happening? Some of the map points fall outside of the building, but this worked fine before.
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/