[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Controlling Heating Discharge Temperature





Ok, so what I have to do is calculate my own load and apply that as a “Sensible Load Request” to a “Unitary HVAC” object.  This reduces heating and lowers the supply air temperature so I can simulate the defective operation of the field equipment I am looking at.  The question now is does this “Sensible Load Request” include or exclude the efficiency of the equipment?

 

Ned Lyon, P.E. (MA)
Staff Consultant

SIMPSON GUMPERTZ & HEGER
781.907.9000 main
781.907.9350 direct 
781.907.9009 fax
www.sgh.com

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Don Shirey
Sent: Monday, August 23, 2010 2:51 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Controlling Heating Discharge Temperature

 

 

This object is controlled by the thermostat setpoint and the calculated cooling/heating load for the control zone .... a setpoint manager is not used to control its operation.


Edward G. Lyon wrote:

I’m trying to control the heating discharge temperature of a Unitary:Furnace:HeatOnly.  I’m having a hard time identifying the right node to control.  I assume that it should be the Air Loop Outlet Node, but that does not seem to be working.  Could it be the Zone Equipment Inlet Node?

 

Ned Lyon, P.E. (MA)
Staff Consultant

SIMPSON GUMPERTZ & HEGER 
     | Engineering of Structures and Building Enclosures

41 Seyon Street, Bldg. 1, Suite 500
Waltham, MA 02453


781.907.9000 main
781.907.9350 direct 
781.907.9009 fax
www.sgh.com

 

 



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___