Re: [EnergyPlus_Support] EMS program debugging

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

You zone time step is 12.  Did you set the value in the
ConvergenceLimits object so that the HVAC time step does not go below the
Zone Time Step?

At 07:40 AM 9/27/2010, Brouchery Herve wrote:
> Hi
> all,
>
> I have a question regarding EMS verbose option.
>
> In my case, the specified timestep is 12. So I expect to obtain data log
> for a period of 5 minutes.
>
> But when I check the generated log, some data are computed for a time
> period less than 5 minutes. Please see below for a log example:
>
> REGUL_STEP1,Line 1,SET FANS_SCHEDULE_OVERRIDE = NULL,, Occurrence
> info=CARROS - - TMY2-999 WMO#=, 06/27 08:37 - 08:38
> REGUL_STEP1,Line 2,IF (BATG_TEMPERATURE > 25),0.0, Occurrence
> info=CARROS - - TMY2-999 WMO#=, 06/27 08:37 - 08:38
> REGUL_STEP1,Line 4,ENDIF,, Occurrence info=CARROS - - TMY2-999 WMO#=,
> 06/27 08:37 - 08:38
>
> Why can this happen? Did I miss something?
>
> Thanks for your help,
> Hervé

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___