[EnergyPlus_Support] Desiccant Regeneration Placement

["grandocu" <jgrando@xxxxxxxxxxxxx>]

Hello,

i'm trying to create a desiccant system in the AirloopHVAC system.  I think I have my process side correct but i'm trying to put my regeneration side in the return air, not the relief air.  The process side is after the cooling coil and before the auxiliary reheat coil.  The regeneration side should in the return air stream before the mixed air node.  When I try to execute this, my system never turns on and the airloop stays off for the whole year with no warning.  Does anyone have experience with this or an example that is similar to my explanation above?  Thanks for the help





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/