RE: [EnergyPlus_Support] Some Tutorials And websites for energy plus

Hi,
please send email at the related topic
for learning energy plus these are my suggestions.
1- if you want to have fewer problems, please change your version to 6.
2-for opening version 5 or older versions at the energy plus version 6 you have to use transmission tool that you can download it from http://energyplus.helpserve.com
3-please check sample file of energy plus that they can be related to your work and check your file and example file differences they are in "C:\EnergyPlusV6-0-0\ExampleFiles" ( if you didn't change the installation path)
4-download training files from energy plus website
http://apps1.eere.energy.gov/buildings/energyplus/energyplus_training.cfm
at the "Energy Plus University Course Teaching Material" after registration you can download training files that they are power point files (6.5 MB zip file)
they are very useful
also if you checked the file that I emailed to you, I corrected your file in version 6.
I hope it is useful.
REZA

On Mon, Nov 15, 2010 at 1:45 PM, clélia moraes <arqclelia@xxxxxxxxxxx> wrote:

Hi Reza

I managed to do with that the version 6 is scanned the version 5. They put the severe returned in the old mistake. As it could correct it. I inform that I am still learning how to use the software.

Program Version,EnergyPlus 5.0.0.031, 11/10/2010 10:04 PM,IDD_Version 5.0.0.031
   * * Warning * * GetAirflowNetworkInput: AirflowNetwork:SimulationControl object, Specified AirflowNetwork Control = "MultizoneWithoutDistribution" and ZoneInfiltration objects plows present.
   * * ~ ~ ~ * *.. ZoneInfiltration objects will not be simulated.
   * * Severe * * GetAirflowNetworkInput: It goes an AirflowNetwork Simulation, attn least one AirflowNetwork:MultiZone:Zone object i required but none were found.
   * * Severe * * GetAirflowNetworkInput: AirflowNetwork:MultiZone:Surface object, Surface Name = JANELASUL
   * * ~ ~ ~ * *.. Zone goes inside surface must be defined in the AirflowNetwork:MultiZone:Zone object. Could not find Zone = ZONA01
   * * Severe * * GetAirflowNetworkInput: AirflowNetwork:MultiZone:Surface object, Surface Name = PORTA LESTE
   * * ~ ~ ~ * *.. Zone goes inside surface must be defined in the AirflowNetwork:MultiZone:Zone object. Could not find Zone = ZONA01

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: reza.energy@xxxxxxxxx
Date: Mon, 15 Nov 2010 03:12:39 +0100
Subject: [EnergyPlus_Support] Some Tutorials And websites for energy plus

Hi ,
Some websites that they have tutorials for energy plus.
There is an online tutorial, http://www.vibyor.com/tutorials
It's a brief tutorial made by Prof. Vishal Garg, from IIIT Hyderabad,India.
There is also a forum on vibyor where the participants of the course can
discuss their problems.
And another tutorial here:
http://www.labeee.ufsc.br/pos-graduacao/ecv_4202/ecv4202_doc.html
There is also the training material designed for University use on the
regular website (which is down until 11/16/2010 morning).
if some one know some thing else please add to this email
with Regards
REZA

__._,_.___

Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___