Re: [EnergyPlus_Support] problem in Parametric :Run Control

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

You will need to submit your input file to the
helpdesk.

For example, we have this in example file 1ZoneParameterAspect:

Parametric:RunControl,
   
AllRuns,                
!- Name
   
Yes,                    
!- Perform run 1
   
Yes,                    
!- Perform run 2
   
Yes,                    
!- Perform run 3
   
Yes,                    
!- Perform run 4
   
Yes;                    
!- Perform run 5

Parametric:SetValueForRun,
   
$aspectRatio,           
!- Parameter Name
   
0.2,                    
!- Value for run 1
   
0.5,                    
!- Value for run 2
   
1,                      
!- Value for run 3
   
2,                      
!- Value for run 4
   
5;                      
!- Value for run 5

Parametric:Logic,
   
Main,                   
!- name
    PARAMETER $bldgArea,     !-
parametric logic line 1
    PARAMETER
$depth,        !- parametric logic
line 2
    PARAMETER
$width,        !- parametric logic
line 3
    PARAMETER $height,      
!- parametric logic line 4
    $bldgArea = 300.0,      
!- parametric logic line 5
    $depth = SQRT($bldgArea / $aspectRatio),  !-
parametric logic line 6
    $width = $depth * $aspectRatio,  !- parametric
logic line 7
    $height =
4.0;           !-
parametric logic line 8

only 5 runs are done.

At 12:36 PM 11/24/2010, reza m wrote:

HI,
I mean to have for example 5 runs we must to Set " No" for 95 runs ! please check the parametric example and add one object in "parametric run control" . you see it make an object that 100 runs are yes!
REZA

On Wed, Nov 24, 2010 at 8:29 PM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:

 

it should only run as many as you have

Parametric Set Value for Run

entered.

At 12:25 PM 11/24/2010, reza m wrote:

Hi Linda,

I added an object in parametric run control but all of 100 controls by default are set " yes"  so if i run the program it simulate 100 times.

is it possible to set all of them "No".

with regards

REZA

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___