[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] DElight in E+ v.6 issue

Hi All,

Did anyone experience any kind of issues with DElight module in the latest Windows version of EnergyPlus?

Once I converted version 4 idf file into version 6, simulation crashed on DElight calculation. Model is composed from three floors and each floor has three equal zones controlled by the DElight module. Gridding resolution was set to 0.5 m2. The problem appeared with two zones on second floor. Once I changed gridding resolution to 0.4 in one zone and to 0.3 in another simulation run smoothly. However, same file, with the 0.5m2 gridding resolution in all zones, completes simulation on Linux with no crashes.

I am wondering if there is any solution to this issue.

Best Regards,

Ivan 



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/