Re: [EnergyPlus_Support] Output reporting

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Output reporting does not have to be hourly.  Can be
the timestep, monthly, daily, etc.

Also, you should look at the tabular reporting, especially the Time bins
report.

Read through the sections titled "Output" and "Standard
Reports" in the Input Output Reference.

and always:
> EnergyPlus
> Documentation is searchable.  Open EPlusMainMenu.pdf under the
> Documentation link and press the "search"
> button.


At 11:22 AM 12/8/2010, Bill Henry wrote:
> I am
> modeling large industrial facilities with large process loads, and have
> recently used EnergyPlus and OpenStudio to model the facilities to
> determine the external load factors.
>  
> I then set up a spread sheet model using ASHRAE bin
> numbers to provide an analysis that can be reviewed by others for basic
> content etc.
>  
> Since the EnergyPlus output is hourly, it requires
> significant manipulation to sort out all of the numbers and match to the
> ASHRAE bin.  It is doubly difficult if I want to obtain results for
> day vs night and weekend vs weekday. 
>  
> Am I overlooking an output set up that would help to
> make this part easier / quicker?
>  
> Bill Henry
>

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___