[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Output reporting



Thanks, that was my conclusion too.  I have had to do that previously and was looking for an easier way.
 
Bill
 
 
 
----- Original Message -----
Sent: Thursday, December 09, 2010 3:44 PM
Subject: RE: [EnergyPlus_Support] Output reporting

 

Output:Table:TimeBins can bin individual outputs by hour and month.    If you are looking to cross-correlate two different outputs, say energy use by outdoor air, then I believe you would need to process that from the hourly data.

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Bill Henry
Sent: Thursday, December 09, 2010 4:34 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Output reporting

 

Hi Linda

I looked and read through those methods of reporting but did not see I could get a report in temperature bins, (outdoor conditions based on 5 deg F. or metric equivalent temperature bins), summarized either monthly or yearly.

Bill

----- Original Message -----

From: Linda Lawrie

Sent: Wednesday, December 08, 2010 11:15 AM

Subject: Re: [EnergyPlus_Support] Output reporting

 

Output reporting does not have to be hourly.  Can be the timestep, monthly, daily, etc.

Also, you should look at the tabular reporting, especially the Time bins report.

Read through the sections titled "Output" and "Standard Reports" in the Input Output Reference.

and always:

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



At 11:22 AM 12/8/2010, Bill Henry wrote:

I am modeling large industrial facilities with large process loads, and have recently used EnergyPlus and OpenStudio to model the facilities to determine the external load factors.
 
I then set up a spread sheet model using ASHRAE bin numbers to provide an analysis that can be reviewed by others for basic content etc.
 
Since the EnergyPlus output is hourly, it requires significant manipul! ation to sort out all of the numbers and match to the ASHRAE bin.  It is doubly difficult if I want to obtain results for day vs night and weekend vs weekday.
 
Am I overlooking an output set up that would help to make this part easier / quicker?
 
Bill Henry
 



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___