[EnergyPlus_Support] Re: CIBSE TM33:2006 - Test G7

["Luis Blanes" <lmblanes@xxxxxxxxx>]

Thanks Andrew. 
My results are far from tolerance values (10 times more).
I did it straightforward in IDF editor. 
What can I do to check your IDF? I dont use Design Builder.

Thanks
Luis
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "andrewbairstow" <andrewbairstow@...> wrote:
>
> Luis
> Took some time but have a positive on all but G7.3 for which the cooling demaind is 13% below (just outside tolerance). If you use the DesignBuilder Support Desk then I could send you idf files.
> Andrew
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Luis Blanes" <lmblanes@> wrote:
> >
> > Has anyone tested Energy Plus against the following test?
> > 
> > CIBSE TM33:2006 - Test G7
> > 
> > I have done it and gives me no good results.
> > 
> > Luis
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/