[EnergyPlus_Support] Water Cooled Condenser

["eddiecorwin" <ecorwin@xxxxxxxxxxxxxxxxxxx>]

I want to model a data center CRAC (Computer Room Air Conditioner) which has a water cooled (dry cooler) DX Coil that can operate in water-side economizer mode.  My issue is that I am unable to find a water cooled DX unit in the IDF Editor.  In the Coil:Cooling:DX objects there is an option to specify the condenser as air-cooled or evaporatively-cooled, but there is no option for water-cooled. Does anyone know how I could go about modeling a water cooled DX unit in Energy Plus?

Thanks,

-Eddie 



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/