Thanks Pedro,But when i changed the orientation to 45deg, the window wall ratio summary is as follows (earlier WWR was 40% on all 4 walls). But here in South it indicates zero.Can anyone help in explaning this.Window-Wall Ratio
Total
North (315 to 45 deg)
East (45 to 135 deg)
South (135 to 225 deg)
West (225 to 315 deg)
Gross Wall Area [m2]
3125.39
518.85
1043.85
518.85
1043.85
Window Opening Area [m2]
1250.16
207.54
625.08
0.00
417.54
Window-Wall Ratio [%]
40.00
40.00
59.88
0.00
40.00
Thanks in advance.
From: Pedro Peixeiro <ppeixeiro@xxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Mon, 3 January, 2011 4:19:46 PM
Subject: Re: [EnergyPlus_Support] Changing orientation of building
Hello Nick.
On the Building object you can specify the angle between the north axis and the y axis of the building. In the IDF editor, its under the Simulation Parameters group, right at the start.
Pedro
On 03-01-2011 10:40, Nick Long wrote:Dear allI need to study the performance of building at different orientation, how can i do that in idf file, keeping all the other envelop details same.Thanks and RegardsNick