Just in case… The “all” indicator is the “*” in the “Key Value” field of the Output:Variable object.
The Building Performance Team
James V. Dirkes II, P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Linda Lawrie
Sent: Wednesday, January 05, 2011 9:57 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Zone Mean Air Temperature
Hard to believe you would not get ANY results for Zone Mean Air Temperature. Unless you are not specifying the name of the zone or using the all zones indicator.
Design builder needs to tell you how they calculate the Building Temperature. Not a familiar term to us.
At 07:18 AM 1/5/2011, Nick Long wrote:
Dear All,
I am trying to find out the air temperature inside a zone of the building, but when i am using the output variable "Zone Mean Air Temperature", it is not working and i am not getting any results in the spreadsheets. Is there any other way to find this.
Also secondly how i can find the building air temperature in E+ as we get in DesignBuilder (irrespective of any zone temperature).
Thanks.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___