Re: [EnergyPlus_Support] (unknown)

[Richard Raustad <RRaustad@xxxxxxxxxxxx>]

Add this to your input file:
Output:VariableDictionary,IDF;

Then run the simulation and after the simulation completes, open the rdd file.

Here you will find all the "Output:Variable" available for your simulation.

On 1/11/2011 8:55 AM, Norman Wogue wrote:

 

Can anyone help in answering the following:

 

1. Is there any way to get temperature outputs directly in deg C.

2. How to find seperate electric consumption for chiller compressor and chiller condenser fans.

3. which variables may give Solar and transmission gains, Ventilation and Infiltraton gains.

 

Thanks

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___