[EnergyPlus_Support] Calculation of Yearly Ideal Loads without Humidity Control

["macias@xxxxxxxxxx" <mcarchbud@xxxxx>]

Hi,
I would like to calculate yearly, ideal cooling and heating loads, without humidity control.  I have planned to use IdealLoads object to do this. However this object requires specifying air humidity level for supplied air.  The energy required for bringing the humidity to the specified level is added to the calculated loads.
 
Can anyone advise, if there is any simple option to simulate the ideal loads without humidity control? 

And if not, if energy required by the ideal loads system without humidity control can be calculated by subtracting latent loads from the results received using the standard IdealLoads object? 

Thanks and Regards
Maciej




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/