Hello all,
I?m a new EnergyPlus user (I?ve used eQUEST before) and came across some very strange results. I wanted to use EnergyPlus because of the DOE Benchmark Buildings (I used the DOE Commercial Building Benchmark - Large Office, pre-1980).
All I wanted to do was see how energy costs vary depending on fenestration performance so I set up 56 runs using the Parametric:SetValueForRun command and let EnergyPlus crank through the results.
I?ll share with you my results first: (this is for a building in MN)
So each line represents a constant U-value for each SHGC value I measured. I was really surprised by this graph. Previous studies using eQuest gave me results that look more like:
Where the lines don?t cross. The only explanation I can come up with for the EnergyPlus results is that in certain situations (say SHGC 0.35) the incoming solar heat is so great that the building benefits from conductive losses so a high (worse) U-value actually leads to energy savings. The problem is I don?t buy it ? not in Minneapolis.
Any suggestions for what?s up? I didn?t alter anything in the file except for adding the parametric data to test the fenestration.
This is my first experience with EnergyPlus so it?s possible I?ve made a huge rookie mistake, but nothing jumped out at me as obviously wrong with my methodology ? especially since I didn?t create the base file.
Happy Holidays and New Years all, I look forward to your comments.
Kind regards,
Alex Krickx
Alex Krickx, LEED AP
Building Energy Specialist
1250 Elko Dr, Sunnyvale, CA 94089
(t) 408.541.8124
Warning: The information contained in this e-mail may be privileged attorney-client communications or attorney work product and/or proprietary and confidential. If the reader of this message is not the intended recipient then you have received it in error and any review, distribution or copying of this message is prohibited and you are to notify us immediately by reply e-mail and delete the original message immediately.
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups..yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___