[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] question about AirLoopHVAC



I am fairly sure that will work. At least the code seems to allow it. You will need to attach your input file and send to:

energyplus-support@xxxxxxxx

or submit a ticket through the help desk web site at:

http://energyplus.helpserve.com/

On 2/16/2011 11:01 AM, Brouchery Herve wrote:
Hello,

I have tried to model the attached AirLoopHVAC system under Energy Plus (see attached file "Dunkle_cycle.pdf ").
I obtained the following error : Invalid Air Loop Component Type = "HEATEXCHANGER:AIRTOAIR:SENSIBLEANDLATENT". Why does Energy Plus have such limitation? Do you know any workaround that I could use?

Thanks in advance for your help.
Hervé

-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___