[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] buildingsurface:detailed, outside boundary condition : zone or surface ?



Dear E+ users,

I would like to model a heat transfert between two adjacent zones (zone1 and zone2) and I'm wondering if the follow inputs are zquivalents :
1 :
First surface :
buildingsurface:detailed,
Surface1,
ConstructionName,
Zone1,
Surface,
Surface2,
...;
Second surface :
buildingsurface:detailed,
Surface2,
ConstructionName,
Zone2,
Surface,
Surface1,
...;

2 :
buildingsurface:detailed,
Surface1,
ConstructionName,
Zone1,
zone,
zone2,
...;

These two ways are right ?

Thanks,

Camille




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/