[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Using EP Macro to Model Template Water to Water Heat Pump system



I think we are talking about different macro's.  

The attached file shows how a 55 zne file can be reduce to that, with all the details in the .inp file.

Note that for zone sizing object, all I have is a list of zone names.  The zone macro will expand that to all the zone sizing object with different names.

Typing ZoneSizing [ Zone1 ]   will change the line with  mmZone  to  Zone 1 and generate the compele listing in the epmIDF file.
=============================
##def  ZoneSizing [ mmZone ]
  Sizing:Zone,
    mmZone,          !- Zone Name
    14.,                     !- Zone Cooling Design Supply Air Temperature {C}
    50.,                     !- Zone Heating Design Supply Air Temperature {C}
    0.009,                   !- Zone Cooling Design Supply Air Humidity Ratio {kg-H2O/kg-air}
    0.004,                   !- Zone Heating Design Supply Air Humidity Ratio {kg-H2O/kg-air}
    flow/person,             !- Outdoor Air Method
    0.00944,                 !- Outdoor Air Flow per Person {m3/s}
      
Hello Mr Baharvand,

Thank you very much for replay.

I'm trying to model a Water to Water Template HVAC system with EP Macro and for me it is not the problem to understand network and node connection. The problem stands, how can be used EP Macro comand to model a Template HVAC system ?

thanks again for replay

Regards,
Dashamir
--- On Mon, 4/4/11, Ehsan Baharvand <ebaharvand@xxxxxxxxx> wrote:

From: Ehsan Baharvand <ebaharvand@xxxxxxxxx>
Subject: Re: [EnergyPlus_Support] Using EP Macro to Model Template Water to Water Heat Pump system
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Date: Monday, April 4, 2011, 7:58 AM

 



Hi,
 
I looked to this problem several weekens ago. The example files below helped me a lot.
You can look to the SVG file to understand the network and connections. Good luck.
 
Kind regards,
Ehsan
 
Example Files Link to Objects - shows the first three example files (if that many exist) that have a particular object.
From the second spreadsheet:
HeatPump:WaterToWater:EquationFit:Cooling 1 GSHPSimple-GLHE.idf
HeatPump:WaterToWater:EquationFit:Heating 1 GSHPSimple-GLHE.idf
HeatPump:WaterToWater:ParameterEstimation:Cooling 2 GSHP-GLHE.idf PlateHeatExchanger.idf
HeatPump:WaterToWater:ParameterEstimation:Heating 2 GSHP-GLHE.idf PlateHeatExchanger.idf
From: dashamir marini <dashamirmarini@xxxxxxxxx>
To: Linda Lawrie <energyplus_support@xxxxxxxxxxxxxxx>; EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Mon, April 4, 2011 3:17:08 PM
Subject: RE: [EnergyPlus_Support] Using EP Macro to Model Template Water to Water Heat Pump system

 
Hi   Li,

Till now I have not get any replay.
I'm trying to understand how does that work, but nothing is explained clearly at E + plus documents (at least for me).

In attachment there is the imf file, which is not more than an example of Water to Water Heat Pump system  idf file converted in  imf file.

I would greatly appreciate any help, advice or discussions..

thanks in advance ...

Dashamir


--- On Sun, 4/3/11, YuanLu Li <yli006@xxxxxxxxxxx> wrote:

From: YuanLu Li <yli006@xxxxxxxxxxx>
Subject: RE: [EnergyPlus_Support] Using EP Macro to Model Template Water to Water Heat Pump system
To: "Linda Lawrie" <energyplus_support@xxxxxxxxxxxxxxx>
Date: Sunday, April 3, 2011, 1:50 PM

 

Did you get any reply to your question?
 
Would you like to share your IMF file for discussion?



 Dr. Li  



 
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: dashamirmarini@xxxxxxxxx
Date: Tue, 29 Mar 2011 10:21:37 -0700
Subject: [EnergyPlus_Support] Using EP Macro to Model Template Water to Water Heat Pump system

 
Hi all,

I'm trying to use EP-Macro Program to model a Template Water to Water HVAC system.
Does any body have modeled such one or symilar system with EP- Macro Program ?

thanks in advance .....

Dashamir



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___





=======
Email scanned by PC Tools - No viruses or spyware found.
(Email Guard: 7.0.0.21, Virus/Spyware Database: 6.17240)
http://www.pctools.com
======= 
Attachment not found:
d:\eudora\attach\Macro_805ZPW15.imf