[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: could anyone help checking my input file

OK I tried this method. The name and main scheme is ok. But still left some critical errors. I think it's just because I cannot fully understand the input syntax with the help document.

 Let me get to one specific error. I used an central air handling system to provide direct air to a zone. So "AirTerminals:Singleduct:Unctrolled" is introduced. The input column does not contain any place to input "outlet node".It only contains "zone inlet node". That is, for unctrolled component, the atu inlet node is also the zone inlet node(that's true according to input output reference doc). But error comes like"the inlet node is "not connected to any zone". I cannot find any place to put the zone inlet and component outlet together.

error are like following:
** Severe  ** Node ZONE954456AIRINLETNODE connects to no component
   **   ~~~   ** Occurs in Supply Air Path=ZONEAIRSUPPLYPATH
   **   ~~~   ** Check the connection to a ZoneHVAC:EquipmentConnections object
   ** Severe  ** An outlet node in AirLoopHVAC="AIRSIDELOOP" is not connected to any zone
   **   ~~~   ** Could not match ZoneEquipGroup Inlet Node="SASPLITTERINLETNODE" to any Supply Air Path or controlled zone
   **  Fatal  ** Preceding errors cause termination 

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Jean marais" <jeannieboef@...> wrote:
>
> 
> My advise would be to take one zone and draw by hand a diagram of the hvacairloop system and how it connects to the zone and zone equipment as well as the return path. Include all the componants and sub componants. concentrate just on air for the time being (later you can do the same for the water loops) and make sure to illustrate the nodes with their respective node names.
> 
> This really helped me.
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "leebye2008" <leebye2008@> wrote:
> >
> > I creat a small simulation file and tried dozens of times. Several kind of errors still exist, mainly about node connections. I can not fix them. Please inform me if anyone could help to check the input file.
> > 
> >  Please tell me how to transfer the input file and general explanation to you for check. Leave you email please.
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/