RE: [EnergyPlus_Support] Running Energy Plus in Ubuntu 10.4 x64,

["Jackson, Alan" <ajackson@xxxxxxxxxxxxxxxxx>]

Can you provide a couple outputs from the terminal. Please enter the following and provide the output



echo $PATH

ls -l /usr/local/

which energyplus



also on a separate note, I don’t know why the installer uses /usr/local as the install path. Most installers I believe install to /opt/ now. Also, you did run the installer as SU right? I mean it would not have been able to make the symbolic link if you didn’t, but it wasn’t clear when you were listing your steps.



Thanks



Alan Jackson, LEED AP

KlingStubbins



From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Michael Grant
Sent: Monday, April 25, 2011 10:45 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: RE: [EnergyPlus_Support] Running Energy Plus in Ubuntu 10.4 x64,







You sure you didn’t make a .deb file in that directory?



Michael Grant, MIT

Engineering | Systemair Inc.

(T) 1-506-743-9500

<mailto:Michael.grant@xxxxxxxxxxxxx>michael.grant@xxxxxxxxxxxxx

<http://www.systemair.net/>http://www.systemair.net



From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Gabi Fantana
Sent: April-24-11 7:09 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Running Energy Plus in Ubuntu 10.4 x64,





Hello,



Yes, I'm running energyplus script from console. After running it it displays the error I've wrote about in my previous post. When I type in console energyplus --help it displays the same error message.



Thank you,

Gabi



From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Sunday, April 24, 2011 5:41 PM
Subject: Re: [EnergyPlus_Support] Running Energy Plus in Ubuntu 10.4 x64,



Are you using the runenergyplus script to run?