[EnergyPlus_Support] Re: Surface Temperature

["Jean marais" <jeannieboef@xxxxxxxxx>]

I don't think you can get this for the suface temperature on the outside, if that's your question. I know the Internal Source Construction object and some others can flag internal temperatures. Look into the energy Absorbed output and try to couple this with the specific heat of the material at different temperatures. Since it's mass related, normilize over per meter and thickness.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "rinad_p" <thparky@...> wrote:
>
> Hello.
> I have modeled a building in EnergyPlus and am now looking for the exterior surface temperature of a roof for the outputs.  I have not been able to figure out how to have the roof surface temperature in the outputs.  Any help would be greatly appreciated.
> Thanks,
> Rina
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/