I want to model interior floors and ceilings composed of carpet pads above 4in thick concrete on metal decking, is the description below correct?
FLOOR, !- Name
MAT-CC05 4 HW CONCRETE, !- Outside Layer
CP02 CARPET PAD; !- Layer 2
CEILING, !- Name
CP02 CARPET PAD, !- Outside Layer
MAT-CC05 4 HW CONCRETE; !- Layer 2
where
CP02 CARPET PAD, !- Name
VeryRough, !- Roughness
0.2165, !- Thermal Resistance {(m2-K)/W}
0.9000, !- Thermal Absorptance
0.7000, !- Solar Absorptance
0.8000; !- Visible Absorptance
MAT-CC05 4 HW CONCRETE, !- Name
Rough, !- Roughness
0.1016, !- Thickness {m}
1.3110, !- Conductivity {W/m-K}
2240.0000, !- Density {kg/m3}
836.8000, !- Specific Heat {J/kg-K}
0.9000, !- Thermal Absorptance
0.7000, !- Solar Absorptance
0.7000; !- Visible Absorptance
Also interior floor composed of 4in thick steel frame walls covered with
gypsum board
INTWALL-1, !- Name
1/2IN Gypsum, !- Outside Layer
1/2IN Gypsum; !- Layer 2
Regards
Fakeha Sehar