[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] My problem with Chilled Ceiling Panels

Pricipally it's easy to set up. But I find it a major work flow problem, because my geometery generation program (Design Builder) does not support radiant floors/ceilings. After exporting geometery, I have to make adjustments to Plant, Zone Equipment, Constructions and assign those constructions into the relevant BuildingDetailed objects.

If I then have to make a geometery change in DB, the whole process starts over. If I have more than 7 Zones, this absolutely kills me!

It also does't report nicely in the AllSummary report.

What we need here is a Template that will work something like a negative ProcessLoad object that can be sized, controlled and coupled to the PlantLoop and report as a HVAC equipment. (perhaps without building it into a construction) These radiant panals are zone HVAC. We are not always dealing with "Betonkernaktivierung" or Activated Concrete Cores.





------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/