[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Suspicious nodes have 0 references - Ventilated Slabs

Hi modellers. I am posting againg last issue with Ventilated slabs, just to see if anybody can give any hint on it.

Thanks
Luis Blanes

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Luis Blanes" <lmblanes@...> wrote:
>
> Hi modellers.
> 
> I have set up a simulation of a Ventilated Slab. Seems to work OK, no severe errors and no worriying warnings.
> 
> Although I found the following issues:
> 
> 1.- I found that the following variable:
> 
> "Ventilated Slab Air Mass Flow Rate"
> "Ventilated Slab Slab Return Air Temperature"
> 
> show constanly 0 value in the simulation results, which means "air is not passing trough the ventilated slab, and not returning...???"
> 
> Results for Air temperature delivered by the Ventilated Slab works OK, and Mean Radiant Temperature is affected by the slab surface, is can be seen comparing MRT and Mean Air Temperature with other zones set with an Ideall Loads HVAC system. 
> 
> 2.- The BND file shows this text:
> 
> 
> ! Suspicious nodes have 0 references.  It is normal for some nodes, however.
> ! Listing nodes with 0 references (culled from previous list):
> ! <Suspicious Node>,<NodeNumber>,<Node Name>,<Node Fluid Type>,<# Times Node Referenced After Definition>
>  Suspicious Node,2,ZONE4VENTSLABZONEINNODE,Air,0
>  Suspicious Node,20,ZONE 4 NODE,Air,0
>  Suspicious Node,21,ZONE 4 OUTLET NODE,Air,0
>  Suspicious Node,22,ZONE_1 ZONE AIR NODE,Air,0
>  Suspicious Node,23,ZONE_1 RETURN OUTLET,Air,0
>  Suspicious Node,25,ZONE_2 ZONE AIR NODE,Air,0
>  Suspicious Node,26,ZONE_2 RETURN OUTLET,Air,0
>  Suspicious Node,28,ZONE_3 ZONE AIR NODE,Air,0
>  Suspicious Node,29,ZONE_3 RETURN OUTLET,Air,0
>  Suspicious Node,34,ZONE4VENTSLABEXHNODE,Air,0
> 
> 
> Anyone have experience simulating Ventilated Slabs?
> 
> Thanks
> Luis Blanes
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/