Yes, use the condenser loop object. In addition to the tower, you should also be connecting some equipment in the plant loop to this condenser loop. The software treats these loops separately through calling subroutines in the program.
On 8/4/2011 11:34 AM, Qianmin Zhang wrote:Do I have to use the object of condenser loop if there is a cooling tower in the plant?
What the purpose to separate the condenser loop from all other plant loop in energyplus?In input and output reference, both plant loop and condenser loop have similar structure diagram (fig 62 and fig. 63)
-- Richard A. Raustad Senior Research Engineer Florida Solar Energy Center University of Central Florida 1679 Clearlake Road Cocoa, FL 32922-5703 Phone: (321) 638-1454 Fax: (321) 638-1439 or 1010 Visit our web site at: http://www.fsec.ucf.edu UCF - From Promise to Prominence: Celebrating 40 Years
__._,_.___