[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] How to create user comment in IDF file





Look in the Energy+.idd file for the object in question. You will see the same notes shown in the idf editor. You can add any notes you like.

Open the idd file (in the C:\EnergyPlusV6-0-0-037 directory or where ever you installed E+) and scroll down to the SimulationControl object. Then open your idf using the text editor and also scroll down to the SimulationControl object.

Now go back to the idf editor.

The are 2 boxes in the idf editor. 1) Comments from IDF and, 2) Explanation of Keyword

The comments are:
 any "! this is a comment" (lines using the exclamation mark) above the field that is highlighted

The Explanation of Keywords are:
The memo fields always show up when you click an object or any fields for that object
The notes show up below any memo text when you click on each field within an object.

Switch between the idd, input file, and idf editor to see how these fields work.

Example for the SimulationControl object:

SimulationControl,
      \unique-object
      \memo Note that the following 3 fields are related to the Sizing:Zone, Sizing:System,
      \memo and Sizing:Plant objects.  Having these fields set to Yes but no corresponding
      \memo Sizing object will not cause the sizing to be done. However, having any of these
      \memo fields set to No, the corresponding Sizing object is ignored.
      \memo Note also, if you want to do system sizing, you must also do zone sizing in the same
      \memo run or an error will result.
  A1, \field Do Zone Sizing Calculation
      \note If Yes, Zone sizing is accomplished from corresponding Sizing:Zone objects
      \note and autosize fields.
      \type choice
      \key Yes
      \key No
      \default No

 

On 8/10/2011 5:41 AM, malindow wrote:
 

Hi,

In the "Getting started with E+" tutorial in www.vibyor.com, it is written: if you click a value within an object in IDF Editor, any user comments from the IDF file will be displayed in the ¡®Comments from IDF' portion of the screen.

This means user can put comments, right? But how to put?

Thank you for the answer.

Sincerely,

Malindo
Mech. Engineering student


-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___