[EnergyPlus_Support] How to set the Pump: variable speed

[韩星 <foolishstar@xxxxxxx>]

Dear all,

In the ASHRAE 90.1G3.1.3.5 and G3.1.3.10, the hot water pump and chilled water pump power should be 19W/gpm and 22W/gpm. In the Pump: variable speed input, the 4 coefficients of the part load performance curve should be input, where shall I find them?

Further, in the baseline building model, shall I use "autosize" or a fixed value in the "rated flow rate" input?

Thanks!

Han Xing

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___