[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] multiple illuminance maps





Warning wins as it obviously didn't create the map.

I will fix the IOref, which was probably done with an earlier version and there were problems so we ended up with only 1 per zone.

At 11:58 AM 8/18/2011, Giulio Castorina wrote:


well the err file says:
** Warning ** GetDetailedDaylighting: found multiple illuminance maps in a single zone
   **   ~~~   ** Zone name =DAYLIT ZONE
   **   ~~~   ** Only the first illuminance map requested will be generated. The simulation continues.

but in the documentation I read at page 457:
"The Z height of the map is constant (parallel to a flat floor). More than one illuminance map can be created for a zone."

So?


Il 18/08/2011 19:28, Linda Lawrie ha scritto:
 

You must do multiple runs to get more than 1 map in a zone, i believe.

At 11:26 AM 8/18/2011, artitecture82 wrote:
Hi All,

I  was trying to output multiple maps on different z values for a single thermal zone;  despite that I was able to input different maps in the editor without getting any errors during runtime it seems just only one was calculated .
Do you know if it actually possible to have more than 1 map for a single zone?



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___