[EnergyPlus_Support] Re: Peak cooling loads

["Jean marais" <jeannieboef@xxxxxxxxx>]

The peak cooling load during your statistical weather year is "most probable". The design day is used to size your systems for that once in a hundred years hot day (the same day occuring over and over again untill building temperatures at the beginning and end of the day equal/match those of the day before and after) x sizing:parameter factors. the design day cooling loads are therefore much more than the statistical year's worst day. 

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "omarvelling" <laxoayi@...> wrote:
>
> Hi all,
> 
> I'm trying to determine the peak cooling loads for my model. I used weather file days as my sizing period and also performed an annual simulation using an ideal loads air system to control the zones. I checked the time of the peak design sensible cooling load from the .eio output file and then checked the output variable file but found the value of the ideal loads air sensible cooling rate to be different from that of the .eio file at the same timestep. Is this normal? Am I missing something here? Why do the values of the sizing differ from the annual simulation although I'm using weather file days to perform sizing?
> 
> Thanks
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/