[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Availability of IdealLoadsAirSystem using EMS





IdealLoadsAirSystem is individual zone thermostat controlled.  You may have used a common setpoint schedule, and a common type declaration for the thermostat..

Each zone is turned off when the zone mean temperature has reached the scheduled set point temperature.
 
The dual-band dead band can be adjusted to disable the system completely, zone by zone.
 
 
 
 Dr. Li  

 

To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: laxoayi@xxxxxxxxxxxxxxxx
Date: Thu, 29 Sep 2011 11:22:13 +0000
Subject: [EnergyPlus_Support] Availability of IdealLoadsAirSystem using EMS

 
Hi All,
Is it possible to use EMS to control the availabilty of an Ideal Loads Air System depending on the zone's mean air temperature as a sensor?
Thanks,
Omar




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___