[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: [EnergyPlus_Support] DXF output from EnergyPlus 6.0



I've attached two screen captures of a building I am working on. The visual studio capture shows the various external boundaries (walls, windows, etc). The DXF screen capture shows the various incorrect aspects of the DXF output. Is this anticipated and does it reflect errors in processing space boundaries?

Kind regards

-Elmer

From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Wednesday, September 7, 2011 11:28 AM
Subject: Re: [EnergyPlus_Support] DXF output from EnergyPlus 6.0

 
Nothing has changed in the EnergyPlus V6 DXF file from earlier versions.

At 11:50 AM 9/7/2011, Elmer Morrissey wrote:


Hello,

Has anyone come across issues with the DXF when the geometry is more complex than a 'box-type' shape.

The DXF generated by EnergyPlus 6.0 is an unreadable file in simulations runs when the simulating the 'whole building'. Ultimately, it cannot be read in any CAD file.

Kind regards

-Elmer








__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\DXF Output1.PNG

Attachment not found:
d:\eudora\attach\VisualStudio Input1.PNG