[EnergyPlus_Support] Low Temp Radiant question

["Jean marais" <jeannieboef@xxxxxxxxx>]

Do you expect the sizing parameter to effect the cooling ability of a radiant ceiling much?

Provided the cooling ceiling surface temp is constantly held at say 16 deg C, and the main radiation exchange is with the opposite floor which very quickly reaches the same temp, do you expect the convection heat transfer to room air to increase with increasing sizing factor? I think not. 

I think increasing the surface area is the only way. 

I'm trying this now by inserting interzone surfaces into the zone all with internal source. 

What do you think? I'm applying this to a zone where I had previously lumped 3 levels together. I'm actually missing the interlevel partitions till now, and noticed the radiant system wasn't performing well. 



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/