[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Help me to create the VAV system and zone

This is happen when in the Simulation Control I put : 
Do Zone Sizing Calculation : NO
Do System Sizing Calculation : NO

If I put them from NO to YES, So I get 1 Fatal error and 2 Severe.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "xav31sob" <rockcolomiers@...> wrote:
>
> Right, I should try the simplest system.
> 
> so I will setup this system : 
> http://www.designbuilder.co.uk/programhelp/_unitary_single_zone.htm
> 
> With DX cooling Single Speed, Heating with water, Fan single speed, and outside air mix.
> But I'm really afraid by the inlet and outlet of each components, and the mainly by the Air Distribution category.
> 
> Thank you for your answers both.
> 
> Xavier
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/